引用本文:朱大奇, 杨永清, 于盛林.电子部件故障诊断的Dempster-Shafer信息融合算法[J].控制理论与应用,2004,21(4):659~663.[点击复制]
ZHU Da-qi, YANG Yong-qing, YU Sheng-lin.Dempster-Shafer information fusion algorithmof electronic equipment fault diagnosis[J].Control Theory and Technology,2004,21(4):659~663.[点击复制]
电子部件故障诊断的Dempster-Shafer信息融合算法
Dempster-Shafer information fusion algorithmof electronic equipment fault diagnosis
摘要点击 1650  全文点击 1994  投稿时间:2002-04-03  修订日期:2003-12-11
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/j.issn.1000-8152.2004.4.038
  2004,21(4):659-663
中文关键词  信度函数  模糊信息融合  DS信息融合  故障诊断
英文关键词  belief function  fuzzy information fusion  DS information fusion  fault diagnosis
基金项目  国家自然科学基金项目(59677021); 江南大学基础科学研究基金项目.
作者单位E-mail
朱大奇, 杨永清, 于盛林 江南大学 工业自动化系,江苏无锡 243002
南京航空航天大学 测试工程系,江苏南京 210016 
zdq367@yahoo.com.cn 
中文摘要
      针对电路故障元件诊断的不确定性问题,给出了光电雷达电子部件故障定位的多传感器Dempster-Shafer(DS)信息融合方法.通过测试电路中的被诊断元件的工作温度和工作电压,得出了DS证据理论中两传感器对各待诊断元件的信度函数分配,再分别利用利用模糊规则和DS联合规则得到融合后的信度函数分配,从而确定故障元件.单传感器诊断与融合诊断的结果比较说明多传感器融合算法具有较高的准确性,而模糊融合算法与DS算法的结果比较则说明DS算法在故障诊断方面更具有优越性.
英文摘要
      In order to reduce uncertain problem of circuit fault diagnosis,an information fusion method,which is for photovoltaic radar electronic equipment fault diagnosis based on Dempster_Shafer (DS) evidential theory and fuzzy logical theory,is presented.According to the measurement results of the temperature and the voltage of circuit component,the belief function assignment of two sensors to circuit component,and the fusion belief function assignment was obtained by using DS rule and fuzzy method respectively,then fault component was found.By comparing the diagnosis results based on separate original data and fused date respectively,the latter was proved more accurate;By comparing fuzzy fusion method with DS algorithm,the DS fusion algorithm is more accurate in the circuit fault recognition.