引用本文:张小平,朱建林,唐华平,张炳根,宋 芳.新型Buck-Boost矩阵变换器的双闭环控制策略[J].控制理论与应用,2009,26(2):203~208.[点击复制]
ZHANG Xiao-ping,ZHU Jian-lin,TANG Hua-ping,ZHANG Bing-gen,SONG Fang.A double-loop control strategy for the new Buck-Boost matrix converter[J].Control Theory and Technology,2009,26(2):203~208.[点击复制]
新型Buck-Boost矩阵变换器的双闭环控制策略
A double-loop control strategy for the new Buck-Boost matrix converter
摘要点击 2475  全文点击 2828  投稿时间:2007-01-17  修订日期:2007-09-25
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/j.issn.1000-8152.2009.2.018
  2009,26(2):203-208
中文关键词  Buck-Boost矩阵变换器  双闭环控制策略  对比分析  仿真
英文关键词  Buck-Boost matrix converter  double-loop control strategy  comparison analysis  simulation
基金项目  国家自然科学基金资助项目(50575228).
作者单位E-mail
张小平 湖南科技大学 信息与电气工程学院, 湖南 湘潭 411201
中南大学 机电工程学院, 湖南 长沙 410083 
zxp836@163.com 
朱建林 湘潭大学 信息工程学院, 湖南 湘潭 411105 zjl@xtu.edu.cn 
唐华平 中南大学 机电工程学院, 湖南 长沙 410083 huapingt-csu@163.com 
张炳根 湖南交通职业技术学院 机电工程系, 湖南 长沙 410004 zbg819@126.com 
宋 芳 湖南科技大学 信息与电气工程学院, 湖南 湘潭 411201 fsong@hnust.edu.cn 
中文摘要
      为了克服传统矩阵变换器电压传输比低的缺陷, 提出了新型Buck-Boost矩阵变换器, 采用双闭环控制策略进行控制. 介绍了该控制策略的基本原理与设计方法, 对比分析了该控制策略与滑模控制及离散滑模控制的各种特性, 并通过仿真对其控制效果进行了验证. 结果表明: 该控制策略不仅具有比滑模控制和离散滑模控制更加优良的动态性能, 而且还具有更强的谐波抑制能力, 其输出波形的谐波失真度更小, 稳态精度更高, 因而具有更好的应用价值.
英文摘要
      Because of the low voltage transfer ratio in a conventional matrix converter and no improvement can be made by employing different control strategies, a new Buck-Boost matrix converter is proposed by employing a doubleloop control strategy. The fundamental principle of this control strategy and its design method are introduced. Various characteristics are then compared among this control strategy, the sliding mode control and the discrete sliding mode control. The validity of this control strategy is also tested by simulation. The results show that the double-loop control strategy makes the system in better dynamic performance and stronger harmonic suppression than the sliding mode control and the discrete sliding mode control, and achieves lower harmonic distortion and higher steady-state precision. These are the most valuable advantages of the proposed converter in engineering applications.