引用本文:俞胜平,王秀英,郑秉霖,柴天佑.基于变约束规划模型的炼钢连铸动态调度[J].控制理论与应用,2009,26(7):771~776.[点击复制]
YU Sheng-ping,WANG Xiu-ying,ZHENG Bing-lin,CHAI Tian-you.Dynamic scheduling for steelmaking and continuous casting based on the programming model with varying constraints[J].Control Theory and Technology,2009,26(7):771~776.[点击复制]
基于变约束规划模型的炼钢连铸动态调度
Dynamic scheduling for steelmaking and continuous casting based on the programming model with varying constraints
摘要点击 1478  全文点击 1039  投稿时间：2008-02-23  修订日期：2008-08-11
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/j.issn.1000-8152.2009.7.CCTA080124
  2009,26(7):771-776
中文关键词  炼钢连铸  动态调度  规划模型  变约束
英文关键词  steelmaking and continuous casting  dynamic scheduling  programming model  varying constraints
基金项目  国家自然科学基金重点资助项目(60534010); 高等学校学科创新引智计划资助项目(B08015).
作者单位E-mail
俞胜平* 东北大学流程工业综合自动化教育部重点实验室 spyu@mail.neu.edu.cn 
王秀英 1东北大学流程工业综合自动化教育部重点实验室；2青岛科技大学信息科学技术学院  
郑秉霖 东北大学流程工业综合自动化教育部重点实验室  
柴天佑 东北大学流程工业综合自动化教育部重点实验室  
中文摘要
      针对炼钢连铸生产过程中时常出现各种扰动, 采用人工调度存在反应慢、调度结果不优化的问题, 在分析各种调整方式基础上, 建立了在线调整非线性规划模型, 通过约束变化满足不同的调整方式要求, 并将模型转化为线性规划模型后对其进行求解. 在国内某大型钢厂应用结果表明: 采用该方法在缩短动态调度时间、减少钢水冗余等待时间、提高设备负荷率方面取得显著成效.
英文摘要
      In deal with the disturbances in the production of steelmaking and continuous casting, the manual scheduling responses slowly and gives un-optimal results. After examining various patterns of manual adjustment of schedule against the disturbances, we propose a non-linear programming model for online dynamic scheduling, in which the required adjustment is realized by changing the constraints. The model is solved by converting it into a linear programming model. This method has been applied to a large steel plant; resulting in an efficient reduction of the dynamic scheduling time and the redundant waiting time for molten steel, and an improvement of the load ratio of facilities.