引用本文:魏伟,李东海,左敏,刘载文.压电定位系统的自抗扰控制设计[J].控制理论与应用,2016,33(10):1319~1326.[点击复制]
Wei Wei,Li Dong-hai,Zuo Min,Liu Zai-wen.Active disturbance rejection control design for piezoelectric positioning system[J].Control Theory and Technology,2016,33(10):1319~1326.[点击复制]
压电定位系统的自抗扰控制设计
Active disturbance rejection control design for piezoelectric positioning system
摘要点击 2570  全文点击 1972  投稿时间:2015-09-28  修订日期:2016-10-01
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2016.50780
  2016,33(10):1319-1326
中文关键词  压电驱动  迟滞  纳米定位  自抗扰  定位精度
英文关键词  piezoelectric actuator  hysteresis  nanopositioning  active disturbance rejection control (ADRC)  positioning accuracy
基金项目  国家自然科学基金项目(61403006), 科技创新平台项目(19008001232), 北京市属高等学校青年拔尖人才培育计划(CIT&TCD201404029), 北京市教委面上项目(KM201410011005)资助.
作者单位E-mail
魏伟* 北京工商大学 计算机与信息工程学院 weiweizdh@126.com 
李东海 清华大学 热能工程系  
左敏 北京工商大学 计算机与信息工程学院  
刘载文 北京工商大学 计算机与信息工程学院  
中文摘要
      纳米定位系统中广泛采用的压电驱动器因存在非线性、多映射的迟滞特性而严重影响了纳米定位系统的 定位精度. 为消除迟滞对定位精度的影响, 将其视为干扰, 设计不基于迟滞及定位系统精确数学模型的自抗扰控制 算法, 利用扩张状态观测器实时估计迟滞, 进而补偿其对定位精度的影响, 获得了良好的定位系统控制仿真效果. 仿 真结果表明, 自抗扰控制器能够有效消除迟滞、提高纳米定位系统的定位精度
英文摘要
      Piezoelectric actuator are commonly used in nanopositioning system. However, nonlinear and multivalue properties, i.e. hysteresis, of piezoelectric materials, which are commonly taken in piezoelectric actuators, will decrease the accuracy of nanopositioning systems. In order to remove the influence of hysteresis, nonlinear and multivalue properties are viewed as the disturbance of system. Active disturbance rejection control (ADRC), a control approach which does not depend on accurate model of hysteresis and nanopositioning system, is designed to achieve the desired control object. Extended state observer is employed to estimate hysteresis, and then it can be compensated in real time. Nice control performance is acquired in the numerical simulations. From the simulation results, we may see that ADRC is able to cancel hysteresis and improve the accuracy of nanopositioning system effectively.