| 引用本文: | 周丽芳,许爱德,李倩妮,朱景伟.考虑谐波影响的开关磁阻电机无位置技术研究[J].控制理论与应用,2021,38(2):177~186.[点击复制] |
| ZHOU Li-fang,XU Ai-de,LI Qian-ni,ZHU Jing-wei.The research for sensorless control of switched reluctance motor considering harmonic effects[J].Control Theory and Technology,2021,38(2):177~186.[点击复制] |
|
| 考虑谐波影响的开关磁阻电机无位置技术研究 |
| The research for sensorless control of switched reluctance motor considering harmonic effects |
| 摘要点击 1735 全文点击 604 投稿时间：2020-02-14 修订日期：2020-08-24 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/CTA.2020.00081 |
| 2021,38(2):177-186 |
| 中文关键词 开关磁阻电机 无位置控制 电感谐波 差值电感 磁饱和 |
| 英文关键词 switched reluctance motor sensorless control inductance harmonics difference inductance magnetic saturation |
| 基金项目 辽宁省科技创新基金项目(2018J12GX039)资助. |
|
| 中文摘要 |
| 针对用传统傅里叶级数相电感模型估计开关磁阻电机转子位置时直接忽略高次谐波, 仅考虑到基波或者
二次谐波, 导致位置估计精度不高的问题, 提出了一种考虑谐波影响的开关磁阻电机无位置控制方法. 该方法通过
对电感进行坐标变换以及差值电感辨识, 消除了傅里叶级数电感的直流分量、偶次谐波分量以及三的倍数次谐波
分量. 选取谐波含量最少的差值电感构建角度—–差值电感关系数学模型, 利用其特征点估算转子位置. 为了验证所
提算法的有效性以及正确性, 以一台12/8极开关磁阻电机为控制对象, 进行了仿真以及实验. 实验结果表明, 减少电
感谐波后估计转子位置精度提高, 且在较大电流条件下用差值电感估计转子位置角度时, 位置估计精度几乎不受电
机磁饱和因素的影响. |
| 英文摘要 |
| For sensorless control of switched reluctance motor (SRM) based on inductance expressed by Fourier series,
the position estimation accuracy of SRM is not high enough caused by ignoring the high-order harmonics directly and only
considering the fundamental or the second-order harmonics when estimating SRM rotor position. To solve this problem, the
sensorless control method of SRM considering the influence of harmonics is proposed. Through coordinate transformation
and difference inductance identification, the dc component, even harmonic component and multiple harmonic component
of Fourier series inductance are eliminated. Then the difference inductance with the least harmonic content is selected as
the inductance curve to estimate the rotor position. The mathematical model of angle-difference inductance relationship is
constructed. Rotor position is estimated by using characteristic points. To verify the effectiveness and correctness of the
proposed algorithm, simulation and experiment are carried out on a 12/8 pole SRM. Experimental results show that the
accuracy of rotor position estimation is improved after reducing the inductance harmonics. Meanwhile, it is almost not
affected by the saturation factor of the motor when the differential inductance is used to estimate the rotor position angle
under the condition of large current. |
|
|
|
|
|