引用本文:张智鑫,刘旭东.基于ESO的永磁同步电机伺服系统快速终端滑模控制[J].控制理论与应用,2023,40(7):1233~1242.[点击复制]
ZHANG Zhi-xin,LIU Xu-dong.Fast terminal sliding mode control of permanent magnet synchronous motor servo system based on ESO[J].Control Theory and Technology,2023,40(7):1233~1242.[点击复制]
基于ESO的永磁同步电机伺服系统快速终端滑模控制
Fast terminal sliding mode control of permanent magnet synchronous motor servo system based on ESO
摘要点击 1437  全文点击 484  投稿时间:2022-04-12  修订日期:2023-06-19
查看全文  查看/发表评论  下载PDF阅读器
DOI编号  10.7641/CTA.2022.20262
  2023,40(7):1233-1242
中文关键词  永磁同步电机  位置控制  非奇异快速终端滑模控制  扩张状态观测器
英文关键词  permanent magnet synchronous motor  position control  non-singular fast terminal sliding mode control  extended state observer
基金项目  国家自然科学基金项目(52037005), 山东省高校青年创新科技支持计划项目(2019KJN033)资助.
作者单位E-mail
张智鑫 青岛大学 zzxsyt2017@163.com 
刘旭东* 青岛大学 xudong19871982@163.com 
中文摘要
      为了优化永磁同步电机(PMSM)伺服系统的控制性能, 本文提出了一种基于非奇异快速终端滑模控制(NFTSMC)和扩张状态观测器(ESO)的复合控制策略. 论文首先建立了考虑集总扰动的永磁同步电机数学模型, 根据所定义的非奇异终端滑模面和趋近律, 设计了位置跟踪控制器, 所设计的控制器采用非级联结构替代了传统的位置环和速度环控制器, 并通过李亚普诺夫定理证明了稳定性和有限时间内收敛. 为了进一步提高系统的抗扰动性能, 本文引入了扩张状态观测器来估计系统扰动并将其应用于前馈补偿. 然后, 文章对系统整体进行了稳定性证明. 最后,文章完成了基于所设计控制器的仿真和实验验证. 结果表明, 该控制器具有良好的位置跟踪性能且收敛速度快, 对外部干扰具有强鲁棒性.
英文摘要
      In order to optimize the control performance of the permanent magnet synchronous motor (PMSM) servo system, a composite control strategy based on the non-singular fast terminal sliding mode control (NFTSMC) and extended state observer (ESO) is proposed. Firstly, the mathematical model of permanent magnet synchronous motor considering lumped disturbance is established, according to the defined non-singular terminal sliding surface and approach law, a position tracking controller is designed, the designed controller adopts a non-cascaded structure to replace the traditional position loop and velocity loop controllers, and the stability and finite time convergence are proved by the Lyapunov theorem. In order to further improve the anti-disturbance performance of the system, an extended state observer is introduced to estimate the system disturbance and applied to feedforward compensation. Then, the stability of the whole system is proved. Finally, the simulation and experimental verification based on the designed controller are completed. The results show that the controller has good position tracking performance and fast convergence speed, strong robustness to external interference.