| This Paper:Browse 1465 Download 730 |
码上扫一扫！ |
| Optimal heat release shaping in a reactivity controlled compression ignition (RCCI) engine |
| C.Guardiola,B.Pla,A.Garc\'{i}a,V.Boronat |
|
|
| (CMT-Motores T\'{e}rmicos, Universitat Polit\`{e}cnica de Val\`{e}ncia, Valencia, Spain) |
|
| 摘要: |
|
| 关键词: |
| DOI： |
|
| 基金项目:This work was supported by Ministerio de Econom\'{i}a y Competitividad through Project TRA2017-78717-R. |
|
| Optimal heat release shaping in a reactivity controlled compression ignition (RCCI) engine |
| C. Guardiola,B. Pla,A. Garc\'{i}a,V. Boronat |
| (CMT-Motores T\'{e}rmicos, Universitat Polit\`{e}cnica de Val\`{e}ncia, Valencia, Spain) |
| Abstract: |
| The present paper addresses the optimal heat release (HR) law in a single cylinder engine operated under reactivity controlled compression ignition (RCCI) combustion mode to minimise the indicated specific fuel consumption (ISFC) subject to different constraints including pressure related limits (maximum cylinder pressure and maximum cylinder pressure gradient). With this aim, a 0-dimensional (0D) engine combustion model has been identified with experimental data. Then, the optimal control problem of minimising the ISFC of the engine at different operating conditions of the engine operating map has been stated and analytically solved. To evaluate the method viability a data-driven model is developed to obtain the control actions (gasoline fraction) leading to the calculated optimal HR, more precisely to the optimal ratio between premixed and diffusive combustion. The experimental results obtained with such controls and the differences with the optimal HR are finally explained and discussed. |
| Key words: Diesel engine, RCCI, combustion analysis, optimal control |
