| 引用本文: | 陈宁,沈晓瑜,桂卫华,阳春华,王凌云.多时滞线性系统的控制参数优化方法[J].控制理论与应用,2011,28(8):1099~1104.[点击复制] |
| CHEN Ning,SHEN Xiao-yu,GUI Wei-hua,YANG Chun-hua,WANG Ling-yun.Control parameterization method of linear systems with multiple time-delays[J].Control Theory and Technology,2011,28(8):1099~1104.[点击复制] |
|
| 多时滞线性系统的控制参数优化方法 |
| Control parameterization method of linear systems with multiple time-delays |
| 摘要点击 2323 全文点击 1640 投稿时间：2010-05-28 修订日期：2010-10-17 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/j.issn.1000-8152.2011.8.CCTA100627 |
| 2011,28(8):1099-1104 |
| 中文关键词 时滞系统 多重状态和控制时滞 控制参数化 序列二次规划算法 |
| 英文关键词 time delayed system multiple state and control delays control parameterization sequential quadratic programming algorithm |
| 基金项目 国家自然科学基金资助项目(61074001, 61074117); 湖南省自然科学基金资助项目(07JJ6138); 中央高校基本科研业务费专项资金资助项目(2010QZZD016); 中南大学研究生教育创新工程资助项目(2011ssxt225). |
|
| 中文摘要 |
| 采用控制参数化方法研究具有连续状态不等式约束和多重状态及控制时滞的线性系统优化控制问题. 通过把时滞系统动态模型中的控制量表示成关于时间的分段常数函数, 把每个控制参数看作决策变量, 将多时滞系统的控制问题转化为数学规划问题. 推导出在连续状态不等式约束条件下的目标函数和约束函数对于待求参数的梯度公式, 并用序列二次规划算法求出其最优控制量. 最后, 将该优化算法应用于湿法炼锌净化过程中. 仿真结果表明, 锌粉的添加量可以有效地减少, 从而避免了资源的浪费. |
| 英文摘要 |
| This paper studies the optimal control method using the control parameterization for a class of optimal control problems involving linear systems subject to continuous state inequality constraints where both the state and the control are allowed to have different time delays. The control of the dynamic system is approximated by a piecewise constant function whose magnitudes are taken as decision vectors. Then, formulae are derived for computing the gradients of the cost and constraint functions. On this basis, a computational method for finding the optimal control is obtained by using the sequential quadratic programming(SQP) algorithm. This computational method is applied to the purification process of zinc hydrometallurgy. The numerical simulation shows that the amount of zinc powder added can be decreased significantly so that the wastage of resources is avoided. |