| 引用本文: | 刘福才,侯甜甜,秦利,冯伟波.考虑铰间间隙和重力影响的空间机械臂轨迹跟踪控制[J].控制理论与应用,2015,32(5):665~673.[点击复制] |
| LIU Fu-cai,HOU Tian-tian,QIN Li,FENG Wei-bo.Trajectory tracking control of space manipulator considering joint clearance and gravity[J].Control Theory and Technology,2015,32(5):665~673.[点击复制] |
|
| 考虑铰间间隙和重力影响的空间机械臂轨迹跟踪控制 |
| Trajectory tracking control of space manipulator considering joint clearance and gravity |
| 摘要点击 2846 全文点击 1352 投稿时间：2014-05-06 修订日期：2015-02-01 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI编号 10.7641/CTA.2015.40403 |
| 2015,32(5):665-673 |
| 中文关键词 铰间间隙 重力 间隙补偿 空间机械臂 牛顿–欧拉 |
| 英文关键词 joint clearance gravity clearance compensation space manipulator Newton–Euler |
| 基金项目 国家高技术研究发展计划项目(863计划2012AA), 河北省自然科学基金(F2015203362)资助. |
|
| 中文摘要 |
| 以在轨服务高精度操控任务为背景, 研究了铰间间隙和重力对空间机械臂末端轨迹跟踪精度的耦合影响, 并设计了间隙补偿控制器. 通过分析不同重力环境下含铰间间隙机构的运动特性, 基于铰间间隙的Kelvin-Voigt线 性弹簧阻尼假设, 建立了地面装调及空间服役两种不同工况下的近似间隙等效模型. 以二自由度空间机械臂为例, 利用牛顿欧拉法推导了重力及重力释放条件下的含间隙机械臂动力学模型, 并分离出了间隙补偿项. 最后, 通过轨 迹跟踪控制仿真研究, 给出了含间隙机械臂在不同重力环境下的动力学行为差异, 同时验证了间隙补偿控制器的有 效性. |
| 英文摘要 |
| Taking the on-orbit servicing high precision manipulation task as background, we investigate the coupling effect of joint clearance and gravity on the accuracy of trajectory tracking for space manipulator, and design the clearance compensation controller. By analyzing the motion characteristics about mechanism with joint clearance under different gravity environments, we build approximate clearance equivalent models for ground alignment as well as for space applications, on the basis of Kelvin-Voigt linear spring damping assumption. Taking a two degree-of-freedom (DOF) manipulator as an example, we use Newton–Euler method to derive the dynamic model of space manipulator with joint clearance in the gravity and gravity release conditions, and isolate the clearance compensation. Through the simulation studies of trajectory tracking control, the differences between the dynamic behaviors of space manipulator in different gravity environments are explored and the effectiveness of the clearance compensation controller is demonstrated. |
|
|
|
|
|